CHARACTERISTIC
High solid UHS clear. Good flow and thixotropic properties. UV resistant. Suitable for applications in spray booths. Clear coat was designed for use on solvent- and waterborne base coat.
APPLICATION
Mixing ratio: 2:1 by volume. Mix thoroughly. Apply with a spray gun with nozzle diameter 1,2 mm in 2 normal coats with 7 - 10 min. flash off between the coats. Additional thinner is not required to use for this products. However, the system may be adjusted with up to 10 % vol. the component A, of out hinder without having negative influences on the desired results.
NOTE
Drying at the ambient temperature extends a curing time.
